Ajuste & acoplador rápido

NTA PWJ Y type high quality plastic push in different diameter socket union/plug in union fitting is used to branching a tubing into two reduced diameter tubings or from two pipes running in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-...

NTA PL-G male G/BSPP thread high quality plastic push in elbow fitting is used to pipe a female thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green o...

NTA PB male G/BSPP thread high quality plastic push in branch tee fitting is used to branch a female thread at both 90° right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red,...

NTA PX male thread high quality Y type plastic push in branch tee fitting is used to branch a female thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, gr...

:
NTA PLF rosca femenina de alta calidad El empuje de plástico en el accesorio del codo se usa para encender un rosca masculina en ángulo recto. Es adecuado para su uso con tubo de nylon y uretano, una gran fuerza de retención, se puede utilizar para una amplia gama de presiones desde un bajo vacío hasta una alta presión de 1.2MPA/174PSI, larga vida útil, el número de ciclo de vida de aire y ruptura de 17.4 millones de ciclos, es de 2.8 a 348 veces de la vida útil de otros proveedores chinos 0.05 a 6.3 miles de millones de ciclos. La estructura de ajuste de aire en el ajuste/un ajuste táctil es la instalación rápida, simple y flexible, ahorro de espacio, tubo fácil de conectar con un toque. Incluso después de la instalación, la parte del cuerpo gira que permiten posicionamiento, todas las roscas cónicas se recubren previamente con teflón con rendimiento del sello fino. El cuerpo de latón níquel garantiza el anti-corrosión y el anticontaminación. Sleev

NTA PHT-3 Presión de plástico de alta calidad en el ajuste de codo masculino triple universal se usa para un hilo de tres ramas en ángulo recto. Tres piezas individuales giran 360 °. Es adecuado para su uso con tubo de nylon y uretano, una gran fuerza de retención, se puede utilizar para una amplia gama de presiones desde un bajo vacío hasta una alta presión de 1.2MPA/174PSI, larga vida útil, el número de ciclo de vida de aire y ruptura de 17.4 millones de ciclos, es de 2.8 a 348 veces de la vida útil de otros proveedores chinos 0.05 a 6.3 miles de millones de ciclos. La estructura de ajuste de aire en el ajuste/un ajuste táctil es la instalación rápida, simple y flexible, ahorro de espacio, tubo fácil de conectar con un toque. Incluso después de la instalación, la parte del cuerpo gira que permiten posicionamiento, todas las roscas cónicas se recubren previamente con teflón con rendimiento del sello fino. El cuerpo de latón níquel se garantiza el cuerpo de latón de la níquel asegura

NTA PKG high quality plastic push in different diameter triple union fitting is used to connecting tubing of reduced size for branching a tubing into 4 tubings in the same direction and at a 90° right angle. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-tre...

0 ~ 1.2MPA
4,6,8,10,12,16 mm
Aire

NTA PY high quality plastic push in Y type union fitting is used to branch a tubing into two tubings. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. Sleeve sh...

El empuje de plástico de alta calidad NTA PK en triple unión se usa para ramificar un tubo en 4 tubos en la misma dirección y en un ángulo recto de 90 °. Es adecuado para su uso con tubo de nylon y uretano, una gran fuerza de retención, se puede utilizar para una amplia gama de presiones desde un bajo vacío hasta una alta presión de 1.2MPA/174PSI, larga vida útil, el número de ciclo de vida de aire y ruptura de 17.4 millones de ciclos, es de 2.8 a 348 veces de la vida útil de otros proveedores chinos 0.05 a 6.3 miles de millones de ciclos. La estructura de ajuste de aire en el ajuste/un ajuste táctil es la instalación rápida, simple y flexible, ahorro de espacio, tubo fácil de conectar con un toque. Incluso después de la instalación, la parte del cuerpo gira que permiten posicionamiento, todas las roscas cónicas se recubren previamente con teflón con rendimiento del sello fino. El cuerpo de latón níquel garantiza el anti-corrosión y el anticontaminación. Color manga azul

NTA PE high quality plastic push in union tee fitting is used to branch tubing at both 90° right angle. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. Sleeve ...

NTA PU high quality plastic push in straight union fitting is used to connect tubing in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. Sle...