Ajuste & acoplador rápido

NTA PG de alta calidad de diferentes diámetros de plástico recto en el ajuste se usa para conectar tubos en diferentes diámetros en la misma dirección. Es adecuado para su uso con tubo de nylon y uretano, una gran fuerza de retención, se puede utilizar para una amplia gama de presiones desde un bajo vacío hasta una alta presión de 1.2MPA/174PSI, larga vida útil, el número de ciclo de vida de aire y ruptura de 17.4 millones de ciclos, es de 2.8 a 348 veces de la vida útil de otros proveedores chinos 0.05 a 6.3 miles de millones de ciclos. La estructura de ajuste de aire en el ajuste/un ajuste táctil es la instalación rápida, simple y flexible, ahorro de espacio, tubo fácil de conectar con un toque. Incluso después de la instalación, la parte del cuerpo gira que permiten posicionamiento, todas las roscas cónicas se recubren previamente con teflón con rendimiento del sello fino. El cuerpo de latón níquel garantiza el anti-corrosión y el anticontaminación. Color manga azul, b

NTA PX male G/BSPP thread high quality Y type plastic push in branch tee fitting is used to branch a female thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, ...

NTA PD-G Male G/BSPP Presión de plástico de alta calidad en el ajuste de tee de rama se usa para ramificar un hilo femenino en ángulos rectos y de 90 °. Es adecuado para su uso con tubo de nylon y uretano, una gran fuerza de retención, se puede utilizar para una amplia gama de presiones desde un bajo vacío hasta una alta presión de 1.2MPA/174PSI, larga vida útil, el número de ciclo de vida de aire y ruptura de 17.4 millones de ciclos, es de 2.8 a 348 veces de la vida útil de otros proveedores chinos 0.05 a 6.3 miles de millones de ciclos. La estructura de ajuste de aire en el ajuste/un ajuste táctil es la instalación rápida, simple y flexible, ahorro de espacio, tubo fácil de conectar con un toque. Incluso después de la instalación, la parte del cuerpo gira que permiten posicionamiento, todas las roscas cónicas se recubren previamente con teflón con rendimiento del sello fino. El cuerpo de latón níquel garantiza el anti-corrosión y el anticontaminación. Color de la manga B

NTA PHT-2-G universal double elbow plastic push in fitting/pneumatic double banjo fitting/modular double banjo fitting/air banjo fitting is ideal when access is only possible from above and orientation of the tube is required. This range of modular fittings includes single and multiple configurations, allowing wide flexibility of design. high quality plastic push in double universal male elbow fitting is used to two-branch a female thread at right angles.Two individual parts rotate 360°. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube ...

NTA POC HEX HEX HEX MAL MAL G/BSPP Presión de plástico de alta calidad en el ajuste se usa para encender una rosca femenina en la misma dirección. El enchufe hexágono interno permite ajustar con una llave hexagonal en espacios confinados. Es adecuado para su uso con tubo de nylon y uretano, una gran fuerza de retención, se puede utilizar para una amplia gama de presiones desde un bajo vacío hasta una alta presión de 1.2MPA/174PSI, larga vida útil, el número de ciclo de vida de aire y ruptura de 17.4 millones de ciclos, es de 2.8 a 348 veces de la vida útil de otros proveedores chinos 0.05 a 6.3 miles de millones de ciclos. La estructura de ajuste de aire en el ajuste/un ajuste táctil es la instalación rápida, simple y flexible, ahorro de espacio, tubo fácil de conectar con un toque. Incluso después de la instalación, la parte del cuerpo gira que permiten posicionamiento, todas las roscas cónicas se recubren previamente con teflón con rendimiento del sello fino.

NTA PC-G Male Recto G/BSPP El empuje de plástico de alta calidad en el ajuste se usa para encender una rosca femenina en la misma dirección. Es adecuado para su uso con tubo de nylon y uretano, una gran fuerza de retención, se puede utilizar para una amplia gama de presiones desde un bajo vacío hasta una alta presión de 1.2MPA/174PSI, larga vida útil, el número de ciclo de vida de aire y ruptura de 17.4 millones de ciclos, es de 2.8 a 348 veces de la vida útil de otros proveedores chinos 0.05 a 6.3 miles de millones de ciclos. La estructura de ajuste de aire en el ajuste/un ajuste táctil es la instalación rápida, simple y flexible, ahorro de espacio, tubo fácil de conectar con un toque. Incluso después de la instalación, la parte del cuerpo gira que permiten posicionamiento, todas las roscas cónicas se recubren previamente con teflón con rendimiento del sello fino. El cuerpo de latón níquel garantiza el anti-corrosión y el anticontaminación. Color manga azul, negro, rojo, gris

NTA PC straight male thread high quality plastic push in fitting is used to pipe a female thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green o...

NTA PMF straight female thread bukhead union high quality plastic push in fitting is used to connect a male thread  and tubing through a panel. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, b...

NTA POC hex holed straight male thread high quality plastic push in fitting is used to pipe a female thread in the same direction. Internal hexagon socket allows tighting with a hexagon wrench in confined spaces. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflo...

NTA PCF bulkhead straight female thread high quality plastic push in fitting is used to pipe a male thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, gre...

NTA PL male thread high quality plastic push in elbow fitting is used to pipe a female thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. ...

NTA PLL male thread high quality plastic push in long elbow/extended male elbow fitting is basically used together with male elbow, its extended height allows for multy-leveled piping and prevents interferene among fittings. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ri...