loading

NTA - Fabricantes de componentes neumáticos profesionales & Ingeniero, especializado en cilindro neumático, regulador de filtro de aire, válvula solenoide y fabricación de ajuste neumático

Ajuste & acoplador rápido

Envía tu consulta

GPL Male Elbow Plastic Push-in Fitting/ Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting
NTA GPL male thread high quality plastic push in elbow fitting is used to pipe a female thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional....
GPL-G Male Elbow Plastic Push-in Fitting/Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting
NTA GPL male G/BSPP thread high quality plastic push in elbow fitting is used to pipe a female thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green op...
PHT-2 Double Universal Elbow Plastic Push-in Fitting/ Pneumatic double Banjo Fittings/Modular double Banjo Fittings
NTA PHT-2 universal double elbow plastic push in fitting/pneumatic double banjo fitting/modular double banjo fitting/air banjo fitting is ideal when access is only possible from above and orientation of the tube is required. This range of modular fittings includes single and multiple configurations, allowing wide flexibility of design. high quality plastic push in double universal male elbow fitting is used to two-branch a female thread at right angles.Two individual parts rotate 360°. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by...
PHF-G Universal Elbow Plastic Push-in Fitting/ Pneumatic Banjo Fittings/Modular Banjo Fittings
NTA PHF-G universal elbow plastic push in fitting/pneumatic banjo fitting/modular banjo fitting is ideal when access is only possible from above and orientation of the tube is required. This range of modular fittings includes single and multiple configurations, allowing wide flexibility of design.It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-c...
PLL-G Male Long Elbow Plastic Push-in Fitting/Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting
NTA PLL-G male G/BSPP thread high quality plastic push in long elbow/extended male elbow fitting is basically used together with male elbow, its extended height allows for multy-leveled piping and prevents interferene among fittings. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gas...
PYJ Socket Union Y Plug in/ Plastic Push-in Fitting/Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting
NTA PYJ Y type high quality plastic push in socket/plug in fitting is used to branching a tubing into two same diameter tubings or from two pipes running in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread se...
sin datos

LEAVE US  A MESSAGE

¡Simplemente deje su correo electrónico o número de teléfono en el formulario de contacto para que los fabricantes de componentes neumáticos de NTA puedan brindarle más servicios! Nombre Correo electrónico Teléfono/WhatsApp Nombre de la empresa Nombre de contacto Correo electrónico Teléfono/WhatsApp Nombre de la empresa Contenido

Cilindro neumático profesional, regulador de filtro de aire, válvula solenoide e ingeniero de ajuste neumático&Fabricante en China

CONTACT US

  0086-136 1656 9784
  0086 136 1656 9784
  0086 136 1656 9784
  0086-574-8721 1981
  0086-574-8702 2814
  www.titan-automation.com

  jet@titan-automation.com

  No.188, Nanshan North Road, Ningbo City, provincia de Zhejiang, China.
Por favor contáctenos

Estamos seguros de decir que nuestro servicio de personalización es sobresaliente.

Copyright © 2025 Ningbo Titan Industrial Automation Co., Ltd. - www.titan-automation.com Todos los derechos reservados. | Mapa del sitio
Customer service
detect