loading

Titan Automation- leading pneumatic cylinders manufacturer & supplier specializing in pneumatic air cylinders for industrial automation needs.

PRODUCTS

Major Pneumatic Cylinder, Components Supplier Since 2002

Titan Automatic is a leading pneumatic components manufacturers and pneumatic components direct factory from China, Professional customization of various pneumatic components. Main products: Air cylinders, Compact Cylinders, Round Cylinders, Two&Three Rods Cylinders, pneumatic actuators, pneumatic Valves, NFPA cylinders, etc.

 

As one of the leading pneumatic cylinders manufacturers in China, we warmly welcome you to wholesale high-grade pneumatic cylinders made in China here from our factory. All our products are with high quality and low price. For more cheap products, contact us now!

Send your inquiry

FP Series Pneumatic Vibrator
0.15~0.8MPa
                               1560~9120rmps
                               Air filtered by 40μm filter element
                               30~6500N
                               G1/8·G1/4
HVFS Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVFS air flow from push in connector to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass bod...
HVFF Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVFF air flow from push in connector to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plate...
HVFS-G Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVFS-G air flow from push in connector to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass b...
HVSF Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSF air flow from thread to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass bod...
HVSS-G Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSS-G air flow from straight G/BSPP male thread to thread, high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Pla...
HVSF-G Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSF-G air flow from thread to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass b...
HVSS Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSS air flow from thread to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures a...
MSQF-G Female Slotted(non return) Brass/Metal Elbow Type/Universal Type/Push-lock Type Throttle Control
NTA MSQF-G female slottednon return brass/metal elbow type/universal type/push-lock type throttle control valve/air flow control valve/pneumatic flow control valve/air flow controller/flow control regulator is used to control action speed of pneumatic cylinder/pneumatic actuators by control air flowrate in the pneumatic system, it precisely permit the optimal rate of airflow for the smooth cylinder movement of driving devices, the compact design provides a comparable range of speed as the conventional speed control do. Electroless nickel plated type is standard. Uni-directional airflow is available for either exhaust or inlet flow control methods. 360°swivel piping is possible. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.6MPa/232PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other ...
MSQ Slotted(non return) Brass/Metal Elbow Type/Universal Type/Push-lock Type Throttle Control Valve
NTA MSQ slottednon return brass/metal elbow type/universal type/push-lock type throttle control valve/air flow control valve/pneumatic flow control valve/air flow controller/flow control regulator is used to control action speed of pneumatic cylinder/pneumatic actuators by control air flowrate in the pneumatic system, it precisely permit the optimal rate of airflow for the smooth cylinder movement of driving devices, the compact design provides a comparable range of speed as the conventional speed control do. Electroless nickel plated type is standard. Uni-directional airflow is available for either exhaust or inlet flow control methods. 360°swivel piping is possible. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.6MPa/232PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fi...
MSQ-G Slotted(non return) Brass/Metal Elbow Type/Universal Type/Push-lock Type Throttle Control Valve
NTA MSQ-G G/BSPP thread slottednon return brass/metal elbow type/universal type/push-lock type throttle control valve/air flow control valve/pneumatic flow control valve/air flow controller/flow control regulator is used to control action speed of pneumatic cylinder/pneumatic actuators by control air flowrate in the pneumatic system, it precisely permit the optimal rate of airflow for the smooth cylinder movement of driving devices, the compact design provides a comparable range of speed as the conventional speed control do. Electroless nickel plated type is standard. Uni-directional airflow is available for either exhaust or inlet flow control methods. 360°swivel piping is possible. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.6MPa/232PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from ...
SL-R Elbow Type/Universal Type/Push-lock Type Throttle Control Valve/Air Flow Control Valve/Pneumatic Flow Control Valve
NTA SL-R R thread/BSPT male thread, elbow type/universal type/push-lock type throttle control valve/air flow control valve/pneumatic flow control valve/air flow controller is used to control action speed of pneumatic cylinder/pneumatic actuators by control air flowrate in the pneumatic system, it precisely permit the optimal rate of airflow for the smooth cylinder movement of driving devices, the compact and light body permits use in confined space, the compact design provides a comparable range of speed as the conventional speed control do. Electroless nickel plated type is standard. Uni-directional airflow is available for either exhaust or inlet flow control methods. 360°swivel piping is possible. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times ...
no data
pneumatic cylinder manufacturer
Industry's Leading Pneumatic Cylinder Manufacturer

Titan Automation is a manufacturing company specializing in the development, production, sales and service of pneumatic components. Is a professional China pneumatic components manufacturers and pneumatic components factory.


Titan Automation is a Ningbo-based leader in pneumatic technology and engineering, dedicated to the development, production, sales, and service of high-quality pneumatic components for industrial automation. With decades of manufacturing experience and a strong engineering heritage, Titan Automation focuses on delivering innovative, reliable solutions that help customers maximize production efficiency, protect personnel, and optimize energy use.


  • With 26 years of pneumatics industry experience.
  • With 21,000 ㎡+ factory area, one of the largest pneumatics production bases in China
  • 9 automated production lines for pneumatic fittings.
  • Equipped with an automated assembly system for pneumatic push-in fittings.
Why Choose us
Titan Automation boasts over 20 years of OEM manufacturing experience, enabling it to provide customers with high-performance pneumatic products.
As a leading pneumatic technology and engineering company, Titan provides innovative pneumatic component solutions for customers in the industrial automation market.
Titan Automation engineers design high-quality and innovative cylinders and directional valves for high-end customers. We design and manufacture custom cylinders to meet your specific or complex pneumatic needs.
We have our own production workshop and warehouse. Our cylinder workshop has 25 machining centers, 32 CNC lathes, and 15 manual drilling machines. Titan Automation's annual production capacity reaches 50,000 pneumatic components.
no data

Products Categories

Pneumatic Cylinder
Pneumatic cylinders also called air cylinders are the final component of the pneumatic or compressed air control mechanical device. Air or pneumatic cylinders are devices that transform compressed air power into mechanical energy. Manufacturers can choose from a wide variety of pneumatic cylinders, including compact cylinders, ISO standard cylinders, NFPA interchangeable cylinders, rotary cylinders, rodless cylinders, and even specialty made-to-order units. This versatility allows them to tailor their automation solutions to suit specific applications.
Pneumatic Solenoid Valve
Pneumatic valve is a device used to control the flow of air or other gasses in a pneumatic system. The valve can be actuated manually, electrically through a solenoid, motorized, or pneumatically. In this case, the media being controlled is air or gas, and hence the materials chosen for the valve body and seal should be compliant with these media. Possible options include aluminum, stainless steel, brass, and industrial-grade plastics. The most commonly used valves are the 3/2, 5/2 and 5/3 valves. With the various valves, different functions can be realised in a pneumatic system.
Pneumatic Vibrator
Pneumatic Vibrators offer high-frequency vibration designed to run off of pneumatic air power. Flexible and portable solutions. According to different pneumatic industrial vibrator structures, Titan Automatic produce pneumatic ball vibrators, pneumatic turbine vibrators, pneumatic roller vibrators, piston vibrators, impact air hammers, linear pneumatic vibrators.
Pneumatic Quick Fittings
Pneumatic fittings are used to connect tubes, hoses, air directional control valve and other pneumatic components in a pneumatic system. Titan automation manufactures a wide range of Pneumatic Quick Fittings which are good for use in a variety of industrial applications, our plastic push in fittings tested lifetime reaches 18 million cycles. We offer plenty of material options, plastic fittings using plastic body and brass threads, brass push in fittings using brass body and stainless steel claw, 304 stainless steel or 316 stainless steel pneumatic fittings are optional too.
Air Filter Regulator Lubricator
Air Filter regulator lubricators, also known as FRLs, are designed to provide a clean air flow in pneumatic applications. Air Filter regulator lubricators (FRL) consists of three elements - a filter (F) to, generally, remove particles above 40 micron in size and water, a regulator (R), which controls pressure and a lubricator (L), to provide a controlled quantity of oil into the system. Titan Automation manufactures high-quality filters, regulators, and lubricators for use in a range of industrial applications.
Shock Absorber
Industrial shock absorbers work by converting kinetic energy into heat energy, thereby significantly reducing the impact and vibration of mechanical equipment and extending its service life. Titan Automation manufactures high-quality adjustable industrial shock absorbers, self-compensating shock absorbers, and rate controllers. Sizes range from M6, M8, M10, M12, M14, M20, M25, M30, M36, M42, M64, to M85. Titan Automation industrial shock absorbers are widely used in plastic bottle blowing machines, molding machines, industrial robots, automotive manufacturing equipment, conveyors, food and beverage equipment, and more.
Angle seat vale
Angle seat valve is an externally controlled valve that uses an angled seat to provide high flow rates and low pressure loss for controlling liquids and gases. Titan automation offers brass valve body, stainless steel valve body, we have plastic actuator, stainless steel actuator and aluminum actuators for customers’ choice. Our angle seat valves are widely use in food&beverage equipment, water industry, textile industry, medical and pharmaceutical industry, Sterilizers steam industry and other general industries.
Pneumatic Manifold
A pneumatic manifold is a device used in pneumatic systems to distribute compressed air or gas to multiple paths from a single source. Pneumatic manifolds are not one-size-fits-all; they are available in various configurations to meet your specific needs. You can choose different pressure ratings, number of stations, port sizes, flow rates, and even housing materials. While some manifolds are designed to work only with valves from specific brands, others comply with universal standards such as ISO 5599 and ISO 15407, allowing you the flexibility to mix and match components from different manufacturers.
no data

LEAVE US  A MESSAGE

Titan Automation is a manufacturing company specializing in the development, production, sales and service of pneumatic components. Is a professional China pneumatic components manufacturers and pneumatic components factory. Contact us for more information!

Titan Automation - Professional pneumatic cylinder, air filter regulator, solenoid valve and pneumatic fitting supplier & manufacturer in China

CONTACT US

  0086-136 1656 9784
  0086 136 1656 9784
  0086 136 1656 9784
  0086-574-8721 1981
  0086-574-8702 2814
  www.titan-automation.com

  jet@titan-automation.com

  NO.188,Nanshan North Road,Ningbo City,Zhejiang Province, China.
Please contact us

We are confident to say that our customization service is outsatnding.

Copyright © 2025 NINGBO TITAN INDUSTRIAL AUTOMATION CO.,LTD. - www.titan-automation.com All Rights Reserved. | Sitemap
Customer service
detect