loading

Titan Automation: fabricante líder de cilindros neumáticos & Proveedor especializado en cilindros neumáticos para necesidades de automatización industrial.

PRODUCTS

Proveedor líder de cilindros neumáticos y componentes desde 2002

Titan Automatic es un fabricante líder de componentes neumáticos y una fábrica directa de componentes neumáticos en China. Ofrece servicios profesionales de personalización de diversos componentes neumáticos. Sus principales productos incluyen: cilindros neumáticos, cilindros compactos, cilindros redondos, cilindros de dos y tres vástagos, actuadores neumáticos, válvulas neumáticas, cilindros NFPA, etc.

Como uno de los principales fabricantes de cilindros neumáticos en China, le invitamos cordialmente a adquirir al por mayor cilindros neumáticos de alta calidad fabricados en China directamente de nuestra fábrica. Todos nuestros productos ofrecen alta calidad a precios bajos. ¡Para obtener más información sobre nuestros productos económicos, contáctenos hoy mismo!

Envía tu consulta

Vibrador neumático de la serie FP
0.15 ~ 0.8MPA
1560 ~ 9120RMPS
Aire filtrado por un elemento de filtro de 40 μm
30 ~ 6500n
G1/8 · G1/4
HVFS Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVFS air flow from push in connector to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass bod...
HVFF Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVFF air flow from push in connector to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plate...
HVFS-G Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVFS-G air flow from push in connector to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass b...
HVSF Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSF air flow from thread to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass bod...
HVSS-G Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSS-G air flow from straight G/BSPP male thread to thread, high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Pla...
HVSF-G Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSF-G air flow from thread to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass b...
HVSS Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSS air flow from thread to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures a...
MSQF-G Female Slotted(non return) Brass/Metal Elbow Type/Universal Type/Push-lock Type Throttle Control
NTA MSQF-G female slottednon return brass/metal elbow type/universal type/push-lock type throttle control valve/air flow control valve/pneumatic flow control valve/air flow controller/flow control regulator is used to control action speed of pneumatic cylinder/pneumatic actuators by control air flowrate in the pneumatic system, it precisely permit the optimal rate of airflow for the smooth cylinder movement of driving devices, the compact design provides a comparable range of speed as the conventional speed control do. Electroless nickel plated type is standard. Uni-directional airflow is available for either exhaust or inlet flow control methods. 360°swivel piping is possible. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.6MPa/232PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other ...
MSQ Slotted(non return) Brass/Metal Elbow Type/Universal Type/Push-lock Type Throttle Control Valve
NTA MSQ slottednon return brass/metal elbow type/universal type/push-lock type throttle control valve/air flow control valve/pneumatic flow control valve/air flow controller/flow control regulator is used to control action speed of pneumatic cylinder/pneumatic actuators by control air flowrate in the pneumatic system, it precisely permit the optimal rate of airflow for the smooth cylinder movement of driving devices, the compact design provides a comparable range of speed as the conventional speed control do. Electroless nickel plated type is standard. Uni-directional airflow is available for either exhaust or inlet flow control methods. 360°swivel piping is possible. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.6MPa/232PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fi...
MSQ-G Slotted (Non Return) Tipo de codo de metal/metal/Tipo universal/Válvula de control del acelerador tipo Push-Lock
NTA MSQ-G G/BSPP Slottednon Brass/Metal Wnow Type/Universal Type/Push-Lock Tipo Válvula de control del acelerador/Válvula de control de flujo de aire/Válvula de control de flujo de flujo neumático/Controlador de flujo de aire/Regulador de control de flujo para control Movimiento liso del cilindro de dispositivos de conducción, el diseño compacto proporciona un rango de velocidad comparable como lo hace el control de velocidad convencional. El tipo de níquel electrolresal es estándar. El flujo de aire unidireccional está disponible para métodos de control de flujo de escape o de escape. La tubería giratoria de 360 ​​° es posible. Es adecuado para su uso con nylon y tubo de uretano, gran fuerza de contención, se puede usar para una amplia gama de presiones desde un vacío bajo hasta una alta presión de 1.6MPa/232psi, larga vida útil, el número de ciclo de vida y ruptura que alcanza 17.4 millones
SL-R Elbow Type/Universal Type/Push-lock Type Throttle Control Valve/Air Flow Control Valve/Pneumatic Flow Control Valve
NTA SL-R R thread/BSPT male thread, elbow type/universal type/push-lock type throttle control valve/air flow control valve/pneumatic flow control valve/air flow controller is used to control action speed of pneumatic cylinder/pneumatic actuators by control air flowrate in the pneumatic system, it precisely permit the optimal rate of airflow for the smooth cylinder movement of driving devices, the compact and light body permits use in confined space, the compact design provides a comparable range of speed as the conventional speed control do. Electroless nickel plated type is standard. Uni-directional airflow is available for either exhaust or inlet flow control methods. 360°swivel piping is possible. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times ...
sin datos
fabricante de cilindros neumáticos
Fabricante líder de cilindros neumáticos de la industria

Titan Automation es una empresa manufacturera especializada en el desarrollo, producción, venta y servicio de componentes neumáticos . Es un fabricante y fábrica de componentes neumáticos profesional en China.


Titan Automation, con sede en Ningbo, es líder en tecnología e ingeniería neumática y se dedica al desarrollo, la producción, la venta y el servicio de componentes neumáticos de alta calidad para la automatización industrial. Con décadas de experiencia en fabricación y una sólida trayectoria en ingeniería, Titan Automation se centra en ofrecer soluciones innovadoras y fiables que ayudan a sus clientes a maximizar la eficiencia de la producción, proteger al personal y optimizar el consumo de energía.


  • Con 26 años de experiencia en la industria neumática .
  • Con una superficie de fábrica de más de 21.000 m², es una de las mayores bases de producción de sistemas neumáticos de China.
  • 9 líneas de producción automatizadas para racores neumáticos.
  • Equipada con un sistema de ensamblaje automatizado para conexiones neumáticas de inserción.
¿Por qué elegirnos?
Titan Automation cuenta con más de 20 años de experiencia en la fabricación de equipos originales (OEM), lo que le permite ofrecer a sus clientes productos neumáticos de alto rendimiento.
Como empresa líder en tecnología e ingeniería neumática, Titan ofrece soluciones innovadoras de componentes neumáticos para clientes en el mercado de la automatización industrial.
Los ingenieros de Titan Automation diseñan cilindros y válvulas direccionales innovadores y de alta calidad para clientes exigentes. Diseñamos y fabricamos cilindros a medida para satisfacer sus necesidades neumáticas específicas o complejas.
Contamos con taller de producción y almacén propios. Nuestro taller de cilindros dispone de 25 centros de mecanizado, 32 tornos CNC y 15 taladradoras manuales. La capacidad de producción anual de Titan Automation alcanza los 50 000 componentes neumáticos.
sin datos

Categorías de productos

Cilindro neumático
Los cilindros neumáticos, también llamados cilindros de aire, son el componente final de los dispositivos mecánicos de control neumático o de aire comprimido. Estos cilindros transforman la energía del aire comprimido en energía mecánica. Los fabricantes pueden elegir entre una amplia variedad de cilindros neumáticos, incluyendo cilindros compactos, cilindros estándar ISO, cilindros intercambiables NFPA, cilindros rotativos, cilindros sin vástago e incluso unidades especiales fabricadas a medida. Esta versatilidad les permite adaptar sus soluciones de automatización a aplicaciones específicas.
Válvula solenoide neumática
Una válvula neumática es un dispositivo que controla el flujo de aire u otros gases en un sistema neumático. Puede accionarse manualmente, eléctricamente mediante un solenoide, motorizada o neumáticamente. Dado que el fluido a controlar es aire o gas, los materiales del cuerpo y la junta de la válvula deben ser compatibles con dicho fluido. Entre las opciones disponibles se incluyen aluminio, acero inoxidable, latón y plásticos industriales. Las válvulas más comunes son las de 3/2, 5/2 y 5/3. Con las distintas válvulas, se pueden implementar diversas funciones en un sistema neumático.
Vibrador neumático
Los vibradores neumáticos ofrecen vibraciones de alta frecuencia y están diseñados para funcionar con aire comprimido. Son soluciones flexibles y portátiles. Según las diferentes estructuras de vibradores neumáticos industriales, Titan Automatic fabrica vibradores neumáticos de bola, de turbina, de rodillo, de pistón, martillos neumáticos de impacto y vibradores neumáticos lineales.
Acoplamientos rápidos neumáticos
Los racores neumáticos se utilizan para conectar tubos, mangueras, válvulas de control direccional de aire y otros componentes neumáticos en un sistema neumático. Titan Automation fabrica una amplia gama de racores neumáticos rápidos, ideales para diversas aplicaciones industriales. Nuestros racores de inserción de plástico tienen una vida útil probada de hasta 18 millones de ciclos. Ofrecemos una gran variedad de materiales: racores de plástico con cuerpo de plástico y rosca de latón, racores de inserción de latón con cuerpo de latón y garra de acero inoxidable, y también racores neumáticos de acero inoxidable 304 o 316.
Regulador de filtro de aire y lubricador
Los reguladores-lubricadores de filtro de aire (FRL) están diseñados para proporcionar un flujo de aire limpio en aplicaciones neumáticas. Un FRL consta de tres elementos: un filtro (F) que, generalmente, elimina partículas de más de 40 micras y agua; un regulador (R), que controla la presión; y un lubricador (L), que suministra una cantidad controlada de aceite al sistema. Titan Automation fabrica filtros, reguladores y lubricadores de alta calidad para diversas aplicaciones industriales.
Amortiguador
Los amortiguadores industriales funcionan convirtiendo la energía cinética en energía térmica, lo que reduce significativamente el impacto y la vibración de los equipos mecánicos y prolonga su vida útil. Titan Automation fabrica amortiguadores industriales ajustables de alta calidad, amortiguadores autocompensantes y controladores de velocidad. Los tamaños disponibles van desde M6 hasta M85. Los amortiguadores industriales de Titan Automation se utilizan ampliamente en máquinas de soplado de botellas de plástico, máquinas de moldeo, robots industriales, equipos de fabricación de automóviles, transportadores, equipos para la industria alimentaria y de bebidas, entre otros.
Valor del asiento angular
La válvula de asiento angular es una válvula de control externo que utiliza un asiento inclinado para proporcionar altos caudales y baja pérdida de presión en el control de líquidos y gases. Titan Automation ofrece cuerpos de válvula de latón y acero inoxidable, así como actuadores de plástico, acero inoxidable y aluminio, según las necesidades del cliente. Nuestras válvulas de asiento angular se utilizan ampliamente en equipos para la industria alimentaria y de bebidas, la industria del agua, la industria textil, la industria médica y farmacéutica, la industria de esterilización por vapor y otras industrias en general.
Colector neumático
Un colector neumático es un dispositivo utilizado en sistemas neumáticos para distribuir aire o gas comprimido a múltiples rutas desde una única fuente. Los colectores neumáticos no son de tamaño estándar; están disponibles en diversas configuraciones para satisfacer sus necesidades específicas. Puede elegir diferentes presiones nominales, número de estaciones, tamaños de puerto, caudales e incluso materiales de carcasa. Si bien algunos colectores están diseñados para funcionar únicamente con válvulas de marcas específicas, otros cumplen con estándares universales como ISO 5599 e ISO 15407, lo que le permite la flexibilidad de combinar componentes de diferentes fabricantes.
sin datos

LEAVE US  A MESSAGE

Titan Automation es una empresa manufacturera especializada en el desarrollo, la producción, la venta y el servicio de componentes neumáticos. Somos fabricantes y fábricas de componentes neumáticos en China. ¡Contáctenos para más información!

Titan Automation: proveedor profesional de cilindros neumáticos, reguladores de filtros de aire, válvulas solenoides y accesorios neumáticos. & fabricante en China

CONTACT US

  0086-136 1656 9784
  0086 136 1656 9784
  0086 136 1656 9784
  0086-574-8721 1981
  0086-574-8702 2814
  www.titan-automation.com

  jet@titan-automation.com

  No.188, Nanshan North Road, Ningbo City, provincia de Zhejiang, China.
Por favor contáctenos

Estamos seguros de decir que nuestro servicio de personalización es sobresaliente.

Copyright © 2025 Ningbo Titan Industrial Automation Co., Ltd. - www.titan-automation.com Todos los derechos reservados. | Mapa del sitio
Customer service
detect