Conexión neumática y acoplamiento rápido

NTA PKD male thread branch reduced triple high quality plastic push in fitting is used to reduced three-branch a female thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, b...

NTA PKB Rama de hilo macho El empuje de plástico triple de alta calidad en el ajuste se usa para tres ramas de un hilo femenino en ángulo recto. Es adecuado para su uso con tubo de nylon y uretano, una gran fuerza de retención, se puede utilizar para una amplia gama de presiones desde un bajo vacío hasta una alta presión de 1.2MPA/174PSI, larga vida útil, el número de ciclo de vida de aire y ruptura de 17.4 millones de ciclos, es de 2.8 a 348 veces de la vida útil de otros proveedores chinos 0.05 a 6.3 miles de millones de ciclos. La estructura de ajuste de aire en el ajuste/un ajuste táctil es la instalación rápida, simple y flexible, ahorro de espacio, tubo fácil de conectar con un toque. Incluso después de la instalación, la parte del cuerpo gira que permiten posicionamiento, todas las roscas cónicas se recubren previamente con teflón con rendimiento del sello fino. El cuerpo de latón níquel garantiza el anti-corrosión y el anticontaminación. Color manga azul, negro, rojo, gris,

NTA PM straight bukhead union high quality plastic push in fitting is used to connect tubing through a panel. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. S...

1.0MPA
Aire

1.0MPA
Aire

1.0MPA
Aire

1.0MPA
Aire

Enchufe de latón hexgon hexgon

Zócalo de latón

A-PVF Brass Femenino Femenino

Camiseta masculina de latón a-po

Enchufe hexgon de latón a-gym