loading

NTA - Профессиональные производители пневматических компонентов & Инженер, специализирующийся на пневматическом цилиндре, регуляторе воздушного фильтра, соленоидном клапане и пневматическом производстве.

PRODUCTS
PRODUCTS
TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting 1
TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting 2
TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting 3
TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting 4
TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting 1
TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting 2
TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting 3
TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting 4

TPE Union Tee Nikel Latch Push On Fitings/Union Tee Compressed Air Push On Fiting

NTA TPE Union TEE Высококачественный никельский латунный толчок на фитингах/Union Tee Compressed Воздух на фитингах/металлическом союзе Запорные гайки могут быть затянуты как вручную, так и с гаечным ключом даже в случае жестких трубок, таких как PA или полиэфир Hytrel. Особая форма руководящего конуса гарантирует, что трубка не может быть случайно разрезана. Большая сила поддержания, ее можно использовать для широкого спектра давлений от низкого вакка до высокого давления 2,5 МПа/362,5 фунтов на пю. Отключение, компактное и эргономичное. Долгому продолжительности жизни, воздушное и разбив число жизненного цикла. NTA Union Tee Tee Brass Push-In Fitings на 100% испытывают утечку в производстве, гарантированное качество. Металлическая нажатая на подготовительную применение: пищевые процессы, кофейные машины, автомобильное растение, медицинское оборудование, печатные машины, тупики, роботы сварки и т. Д.

Рабочий давление
0 ~ 2,5 МПа
Tubeod
4, 6, 8, 10, 12, 16 мм
Жидкость
Воздух, вода

    Ой ...!

    Нет данных о продукте.

    перейдите на домашнюю страницу


    Как заказать

    TPE图.jpg


    Рекомендуется
    TPM Bulkhead Union Straight Brass Push on Fittings/Brass Pneumatic Push on Fitting/Compressed Air Bulkhead Fitting
    NTA TPM bulkhead straight union high quality nikel plated brass push on fitting/brass pneumatic push on fitting/compressed air bulkhead fitting/metal bulkdhead union straight push on fitting is connect tubing through a panel. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and e...
    TPEG Brass Tee Reducer/Nikel Plated Brass Push on Reducer/ Brass Pneumatic Tee Reducer Fitting
    NTA TPEG brass T reducer/metal different diameter Tee/brass pneumatic tee reducer fitting/compressed air tee fitting/metal different diameter tee is used to connect tubing of reduced size for branching at a 90° angle from two pipes running in the same direction. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connec...
    TPH Universal Elbow Brass Push on Fittings/Pneumatic Banjo Fitting/Metal Banjo Tube Fitting/Brass Banjo Fittings
    NTA TPH universal elbow high quality nikel plated brass push on fitting/pneumatic banjo fitting/metal banjo tube fitting/brass banjo fitting is ideal when access is only possible from above and orientation of the tube is required.The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.  This range of modular fittings includes single and multiple configurations, allowing wide flexibility of design. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pres...
    TPZA Union Cross Brass Push on Fittings/ Union Cross Brass Pneumatic Push on Fitting/Compressed Air Union Cross Fitting
    NTA TPZA union cross high quality nikel plated brass push on fitting/union cross brass pneumatic push on fitting/compressed air union cross fitting/metal union cross push on fitting is used to four-branch a line. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. lon...
    нет данных
    Отправьте свой запрос
    Связанные продукты
    нет данных

    Профессиональный пневматический цилиндр, регулятор воздушного фильтра, соленоидный клапан и инженер с пневматическим фитинг&производитель в Китае

    CONTACT US

      0086-136 1656 9784
      0086 136 1656 9784
      0086 136 1656 9784
      0086-574-8721 1981
      0086-574-8702 2814
      www.titan-automation.com

      jet@titan-automation.com

      № 188, Наншан Норт -роуд, город Нинбо, провинция Чжэцзян, Китай.
    Пожалуйста, свяжитесь с нами

    Мы уверены, что наша служба настройки является выдающейся.

    Copyright © 2025 Ningbo Titan Industrial Automation Co., Ltd. - www.titan-automation.com Все права защищены. | Sitemap
    Customer service
    detect