Фитинга & Быстрая муфта

NTA TPC male straight nikel plated brass push on fitting/rapid push on fitting/metal screw lock fitting can be easily installed. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting...

NTA TPD nikel plated rapid push on run tee fitting/pneumatic push on run tee fitting/metal screw lock run tee fitting is used to pipe a female thread at right angles, it can be easily installed. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.  It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cy...

NTA TPE Union TEE Высококачественный никельский латунный толчок на фитингах/Union Tee Compressed Воздух на фитингах/металлическом союзе Запорные гайки могут быть затянуты как вручную, так и с гаечным ключом даже в случае жестких трубок, таких как PA или полиэфир Hytrel. Особая форма руководящего конуса гарантирует, что трубка не может быть случайно разрезана. Большая сила поддержания, ее можно использовать для широкого спектра давлений от низкого вакка до высокого давления 2,5 МПа/362,5 фунтов на пю. Отключение, компактное и эргономичное. длительный срок службы, воздух и нарушайте число жизненного цикла, достигая 17,4 миллиона человек

NTA TPLF nikel plated elbow push on fitting/pneumatic elbow push on fitting/metal screw lock elbow fitting/rapid elbow push on fitting is used to pipe a female thread at right angles.  can be easily installed. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.  It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching ...

NTA TPC-C brass mini push on fitting/pneumaitc mini push on fitting/metal mini screw lock fitting/rapid mini push on fitting/brass miniature fittings is used to connect small size/mini size tubes. Connecting thread M5/1/8, connecting tube size 4mm and 6mm. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance,excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching...

NTA TPEG brass T reducer/metal different diameter Tee/brass pneumatic tee reducer fitting/compressed air tee fitting/metal different diameter tee is used to connect tubing of reduced size for branching at a 90° angle from two pipes running in the same direction. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connec...

NTA TPG union straight reducer/ high quality nikel plated brass reducer/union straight brass push on fitting/brass union straight pneumatic fitting is used to connect tubing at different diameters at the same direction.The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomi...

0 ~ 1,2 МПа
4,6,8,10,12,16 мм
Воздух

NTA MPD Металлический пробег высококачественный никельский латунный протокол в фитинге подходит для использования с нейлоновой и уретановой трубкой, большей силой поддержания, его можно использовать для широкого спектра давлений от низкого ваккума до высокого давления 2,5 МПа/362,5PSI, превосходное устойчивость к высокой и вакууме, превосходные механические характеристики, длинный устойчивый и вибрасив. Химическое покрытие никеля, полный поток, минимальное падение давления, превосходная химическая совместимость, одна фиталка для многочисленных применений: оптимизация запаса, ручное соединение и разъединение, компактное и эргономичное. Долгому продолжительности жизни, воздушное и разбив число жизненного цикла. NTA Brass Push-Inttings на 100% испытывают утечку в производстве, гарантированное качество.

NTA MPOC hexagon socket head male straight thread high quality nikel plated brass push in fitting is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI.  Internal hexagon socket allows tighting with a hexagon wrench in confined spaces. Excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. NTA brass push-in fittings are 100% leak-tested in production,guaranteed quality....

NTA MPE union tee high quality nikel plated brass push in fitting is used to branch tubing at both 90° right angle. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. NTA union tee brass push-in fittings are 100% leak-tested in production,guaranteed quality.                                                    ...

NTA MPC мужская прямая нить Высококачественная никелевая латунная протоколка в фитинге подходит для использования с нейлоновой и уретановой трубкой, большой силой поддержания, его можно использовать для широкого диапазона давлений от низкого вакка вверх до высокого давления 2,5 МПа/362,5PSI, превосходная устойчивость к высокой и вакууме, превосходные механические характеристики, длинный с сопротивлением и вибрацией, отличная схема и ковер Химическое покрытие никеля, полное поток, минимальное падение давления, одно из них для многочисленных применений: оптимизация запаса, ручное соединение и разъединение, компактное и эргономичное. Долгому продолжительности жизни, воздушное и разбив число жизненного цикла. NTA Brass Push-Inttings на 100% испытывают утечку в производстве, гарантированное качество.