NTA - fabricantes profissionais de componentes pneumáticos & Engenheiro, especializado em cilindro pneumático, regulador de filtro de ar, válvula solenóide e fabricação de ajuste pneumático

TPU Brass Push em acessórios diretos de união/ encaixe pneumático da união pneumática/ ajuste de ar comprimido 1

TPU Brass Push em acessórios diretos de união/ encaixe pneumático da união pneumática/ ajuste de ar comprimido 2

TPU Brass Push em acessórios diretos de união/ encaixe pneumático da união pneumática/ ajuste de ar comprimido 3

TPU Brass Push em acessórios diretos de união/ encaixe pneumático da união pneumática/ ajuste de ar comprimido

NTA TPU Push de união reta de Brass TPU Nikel Push no encaixe de união reta de encaixe/bronze/encaixe de ar comprimido/união reta de metal no encaixe é usada para conectar a tubulação na mesma direção. As porcas de travamento push-in podem ser apertadas manualmente e com uma abalção, mesmo no caso de tubos rígidos, como o PA ou o hemterl. A forma especial do cone orientador garante que o tubo não possa ser cortado acidentalmente. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one ﬁtting Para inúmeras aplicações: otimização de estoque, conexão manual e desconexão, compacto e ergonômico. Longa vida útil, ar e quebrar o número do ciclo de vida atingindo 17,4 milhões de ciclos, é de 2,8 a 348 vezes a vida útil de outros fornecedores chineses de ajuste de 0,05 a 6,3 milhões de ciclos. Os acessórios de push-in da NTA são 100% testados em produção, qualidade garantida. Aplicações de encaixe de push-on de metal: processo de alimentos, máquinas de café, automotivo na planta, equipamentos médicos, máquinas de impressão, neblina, robôs de soldagem etc.

Pressão de trabalho

0 ~ 2,5mpa

Tubeod

4, 6, 8, 10, 12, 16mm

Fluido

Ar, água

investigação

Escreva uma crítica

Como pedir

TPU 图.jpg

Recomendado

TPM Bulkhead Union Straight Brass Push on Fittings/Brass Pneumatic Push on Fitting/Compressed Air Bulkhead Fitting

NTA TPM bulkhead straight union high quality nikel plated brass push on fitting/brass pneumatic push on fitting/compressed air bulkhead fitting/metal bulkdhead union straight push on fitting is connect tubing through a panel. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one ﬁtting for numerous applications: stock optimisation, manual connection and disconnection, compact and e...

TPEG Brass Tee Reducer/Nikel Plated Brass Push on Reducer/ Brass Pneumatic Tee Reducer Fitting

NTA TPEG brass T reducer/metal different diameter Tee/brass pneumatic tee reducer fitting/compressed air tee fitting/metal different diameter tee is used to connect tubing of reduced size for branching at a 90° angle from two pipes running in the same direction. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one ﬁtting for numerous applications: stock optimisation, manual connec...

TPH Universal Elbow Brass Push on Fittings/Pneumatic Banjo Fitting/Metal Banjo Tube Fitting/Brass Banjo Fittings

NTA TPH universal elbow high quality nikel plated brass push on fitting/pneumatic banjo fitting/metal banjo tube fitting/brass banjo fitting is ideal when access is only possible from above and orientation of the tube is required.The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. This range of modular fittings includes single and multiple configurations, allowing wide flexibility of design. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pres...

TPZA Union Cross Brass Push on Fittings/ Union Cross Brass Pneumatic Push on Fitting/Compressed Air Union Cross Fitting

NTA TPZA union cross high quality nikel plated brass push on fitting/union cross brass pneumatic push on fitting/compressed air union cross fitting/metal union cross push on fitting is used to four-branch a line. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one ﬁtting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. lon...