loading

Titan Automation – ledande tillverkare av pneumatiska cylindrar & leverantör specialiserad på pneumatiska luftcylindrar för industriell automation.

Stäng av ventil/handventiler

Stäng av ventil/handventiler

Till stor del, produktens utseende, funktioner, paket etc. kan vara de viktiga faktorerna som lockar kunder. I processen för utveckling av avstängningsventil/handventiler har våra designers följt den senaste trenden och analyserat kundernas smak, vilket gör produkten unik i sin struktur och designstil. När det gäller dess funktioner försöker vi göra det enastående genom att anta råvaror på hög nivå. Det har fördelarna med att stänga av ventil/handventiler

Skicka din förfrågan

HVFS Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVFS air flow from push in connector to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass bod...
HVFF Stäng av ventil/fingerventil/handventiler/Restavlastning 3 Portventil
NTA HVFF Luftflöde från tryck i kontakten för att trycka in kontakten Högkvalitet Stäng av ventil // Fingerventil/handventiler/Restavlastning 3 Portventil används för att slå på eller stänga av tryckluftflödet i det pneumatiska systemet. Driftskraften reduceras, popparventilkonstruktion lider sällan tätningsavhoppning. 3-portventilen släpper ut resttryck från 2A med handtaget som är inställt vid stängning. Det är lämpligt för användning med nylon- och uretanrör, stor fästkraft, det kan användas för ett brett spektrum av tryck från ett lågt vaccum upp till ett högt tryck på 1,2mpa/174psi, lång livslängd, luft genom och bryt livscykelnummer som når 17,4 miljoner cykler, det är 2,8 till 348 gånger livstid från andra kinesiska tillförselar0,0,0,0,0,3. Luftmonteringsstrukturen i montering/en touchmontering är snabb installation, enkel och flexibel, rymdbesparande, lätt att ansluta röret med en beröring. Alla avsmalnande trådar är förbelagda med teflon med fin tätningsprestanda.
HVFS-G Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVFS-G air flow from push in connector to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass b...
HVSF Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSF air flow from thread to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass bod...
HVSS-G Stäng av ventil/fingerventil/handventiler/Restavlastning 3 Portventil
NTA HVSS-G Luftflöde från rak G/BSPP Manlig tråd till tråd, högkvalitativ avstängningsventil // fingerventil/handventiler/restavlastning 3 Portventil används för att slå på eller stänga av tryckluftflödet i det pneumatiska systemet. Driftskraften reduceras, popparventilkonstruktion lider sällan tätningsavhoppning. 3-portventilen släpper ut resttryck från 2A med handtaget som är inställt vid stängning. Det är lämpligt för användning med nylon- och uretanrör, stor fästkraft, det kan användas för ett brett spektrum av tryck från ett lågt vaccum upp till ett högt tryck på 1,2mpa/174psi, lång livslängd, luft genom och bryt livscykelnummer som når 17,4 miljoner cykler, det är 2,8 till 348 gånger livstid från andra kinesiska tillförselar0,0,0,0,0,3. Luftmonteringsstrukturen i montering/en touchmontering är snabb installation, enkel och flexibel, rymdbesparande, lätt att ansluta röret med en beröring. Alla avsmalnande trådar är förbelagda med teflon med fin tätningsprestanda.Nickel-Pla
HVSF-G Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSF-G air flow from thread to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass b...
HVSS Shut Off Valve/Finger Valve/Hand Valves/Residual Relief 3 Port Valve
NTA HVSS air flow from thread to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures a...
inga data

LÄMNA OSSA MESSAGE

Titan Automation är ett tillverkningsföretag specialiserat på utveckling, produktion, försäljning och service av pneumatiska komponenter. Är en professionell kinesisk tillverkare av pneumatiska komponenter och fabrik för pneumatiska komponenter. Kontakta oss för mer information!

Titan Automation - Professionell leverantör av pneumatiska cylindrar, luftfilterregulatorer, magnetventiler och pneumatiska kopplingar & tillverkare i Kina

CONTACT US

  0086-136 1656 9784
  0086 136 1656 9784
  0086 136 1656 9784
  0086-574-8721 1981
  0086-574-8702 2814
  www.titan-automation.com

  jet@titan-automation.com

  No.188, Nanshan North Road, Ningbo City, Zhejiang -provinsen, Kina.
Vänligen kontakta oss

Vi är övertygade om att säga att vår anpassningstjänst är enastående.

Copyright © 2025 Ningbo Titan Industrial Automation Co., Ltd. - www.titan-automation.com Alla rättigheter reserverade. | Webbplatskart
Customer service
detect