Acessório & Couplador rápido

NTA SS-PEG stainless steel union tee reducer/stainless steel union tee push in fitting/stainless steel different tube diameter one touch tube fitting/stainless steel push to connect fitting is used to connect tubing of reduced size for branching at a 90° angle from two pipes running in the same direction. It is high resistance to aggressive environments, all fluids compatible with the fittings and tubing component materials excellent for conveying aggressive fluids, hygienic external design for reducing retention zones, proven gripping technology. Wide range of applications: perfect for permanent contact with foodstuffs, excellent in saline environments and outdoor applications, resistant to industrial cleaning agents and detergents, compatible with polymer and grooved stainless steel tubing. resistant to hammering, mechanical shock and impulse, manual connection and disconnection, no tools required.100% leak-tested in production. 316 stainless steel fittings, 304 stainless steel fit...

NTA SS-PM stainless steel bulkhead union push in connector/stainless steel bulkhead push in fitting/stainless steel one touch tube fitting/stainless steel push to connect fitting is used to connect tubing through a panel. It is high resistance to aggressive environments, all fluids compatible with the fittings and tubing component materials excellent for conveying aggressive fluids, hygienic external design for reducing retention zones, proven gripping technology. Wide range of applications: perfect for permanent contact with foodstuffs, excellent in saline environments and outdoor applications, resistant to industrial cleaning agents and detergents, compatible with polymer and grooved stainless steel tubing. resistant to hammering, mechanical shock and impulse, manual connection and disconnection, no tools required.100% leak-tested in production. 316 stainless steel fittings, 304 stainless steel fittings, stainless steel hygienic fittings,stainless steel bulkhead connectors, stainle...

NTA TPCF fêmea fêmea Nikel Push Brass Push On Fitting/Rapid Push On Fitting/Metal Feard A fixação pode ser facilmente instalada. As porcas de travamento push-in podem ser apertadas manualmente e com uma chave inglesa, mesmo em caso de tubos rígidos como o PA ou o poliéster Hytrel. A forma especial do cone orientador garante que o tubo não possa ser cortado acidentalmente. É adequado para uso com nylon e tubo de uretano. Grande força de retenção, pode ser usada para uma ampla gama de pressões, excelente resistência a alta pressão e vácuo, excelente desempenho mecânico, fios longos para resistir a choques e vibrações, excelente resistência à abrasão e corrosão devido à alta ereto de níquel químico, fluxo total, queda de pressão mínima, uma queda de ereto e a otimização de estoque: a otimização do estoque, a conexão do manual e a desconexcionamento. Longa vida útil, ar e quebrar o número do ciclo de vida atingindo 17,4 milhões de ciclos, é 2,8 a 348 vezes a vida de outras pessoas chinesas

NTA TPL nikel plated elbow push on fitting/pneumatic elbow push on fitting/metal screw lock elbow fitting/rapid elbow push on fitting is used to pipe a female thread at right angles.  can be easily installed. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.  It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 1...

NTA TPLF nikel plated branch tee push on fitting/branch tee pneumatic push on fitting/branch tee metal screw lock fitting/branch tee rapid push on fitting is used to pipe a female thread at right angles.  can be easily installed. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.  It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cy...

NTA TPV Union cotovelo de alta qualidade Nikel Brass Push no encaixe/push pneumático de bronze no encaixe/push de ar comprimido no encaixe/cotovelo de união metálica Push no encaixe é usado para conectar a tubulação em ângulos retos. As porcas de travamento push-in podem ser apertadas manualmente e com uma chave inglesa, mesmo em caso de tubos rígidos como o PA ou o poliéster Hytrel. A forma especial do cone de guia garante que o tubo não possa ser cortado acidentalmente. Drop, um ajuste para inúmeras aplicações: otimização de estoque, conexão e desconexão manual, compacto e ergonômico. longa vida útil, ar e quebrar o número do ciclo de vida alcançando

NTA TPZA union cross high quality nikel plated brass push on fitting/union cross brass pneumatic push on fitting/compressed air union cross fitting/metal union cross push on fitting is used to four-branch a line. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. lon...

NTA TPZR branch cross high quality nikel plated brass push on fitting is used to branch a tubing into three tubings, it is suitable for use with nylon and urethane tube, large retaining force.The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 3...

NTA TPU Push de união reta de Brass TPU Nikel Push no encaixe de união reta de encaixe/bronze/encaixe de ar comprimido/união reta de metal no encaixe é usada para conectar a tubulação na mesma direção. As porcas de travamento push-in podem ser apertadas manualmente e com uma abalção, mesmo no caso de tubos rígidos, como o PA ou o hemterl. A forma especial do cone orientador garante que o tubo não possa ser cortado acidentalmente. it is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting Para inúmeras aplicações: otimização de estoque, conexão manual e desconexão, compacto e ergonomi

NTA TPH universal elbow high quality nikel plated brass push on fitting/pneumatic banjo fitting/metal banjo tube fitting/brass banjo fitting is ideal when access is only possible from above and orientation of the tube is required.The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.  This range of modular fittings includes single and multiple configurations, allowing wide flexibility of design. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pres...

NTA TPL-C brass mini elbow push on fitting/pneumaitc mini elbow push on fitting/metal mini elbow screw lock fitting/rapid mini elbow push on fitting/brass miniature elbow fittings is used to connect small size/mini size tubes. Connecting thread M5, connecting tube size 4mm and 6mm. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance,excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break ...

NTA TPM bulkhead straight union high quality nikel plated brass push on fitting/brass pneumatic push on fitting/compressed air bulkhead fitting/metal bulkdhead union straight push on fitting is connect tubing through a panel. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and e...