Anpassung & Schnellkoppler

NTA SS-PMF bulkhead stainless steel push in fitting/stainless steel push in fitting/stainless steel one touch tube fitting/stainless steel push to connect fitting is used to connect a male thread and tubing through a panel. It is high resistance to aggressive environments, all fluids compatible with the fittings and tubing component materials excellent for conveying aggressive fluids, hygienic external design for reducing retention zones, proven gripping technology. Wide range of applications: perfect for permanent contact with foodstuffs, excellent in saline environments and outdoor applications, resistant to industrial cleaning agents and detergents, compatible with polymer and grooved stainless steel tubing. resistant to hammering, mechanical shock and impulse, manual connection and disconnection, no tools required.100% leak-tested in production. 316 stainless steel fittings, 304 stainless steel fittings, stainless steel hygienic fittings,stainless steel bulkhead connectors, stain...

0 ~ 1,2mpa
4,6,8,10,12,16 mm
Luft

NTA PLJ Hochwertiges Kunststoff-Push in Sockel-Ellbogen/Stecker in Ellbogen-Anpassung wird verwendet, um die Rohrrichtung von Ein-Touch-Anpassungen um 90 ° -Multi-Level-Rohrleitungen zu ändern, ist auch mit dem Plug-in-Ellbogen möglich. Es ist für die Verwendung mit Nylon- und Urethanrohr und großer Halterkraft geeignet. Es kann für einen weiten Bereich von Drücken von einem niedrigen Impfstoff bis zu einem hohen Druck von 1,2 MPa/174psi, langer Lebensdauer, Luft durch und brechen Lebenszykluszahl, die 17,4 Millionen Zyklen erreicht haben. Die Luftanpassungsstruktur in der Anpassung/eine Touch-Anpassung ist eine schnelle Installation, einfach und flexibel, platzsparend, einfach zu einem Röhrchen mit einer Berührung angeschlossen. Auch nach der Installation, dem Körperteil dreht sich, und die Positionierung ermöglichen, alle verjüngten Gewinde werden mit Teflon mit feiner Seehundleistung vorgeschichtet. Nickel-plattiertes Messingkörper sorgt dafür

NTA MTPCF high quality brass female connector/female brass compression fitting/female thread compression air fitting/female thread metal compression fitting is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, NTA brass push-in fittings are 100% leak-tested in production,guaranteed quality.                                                                                                                        ...

0 ~ 1,2mpa
4,6 mm
Luft

NTA HVFS air flow from push in connector to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass bod...

NTA HVFF air flow from push in connector to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plate...

NTA HVFS-G air flow from push in connector to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass b...

NTA HVSF air flow from thread to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass bod...

NTA HVSS-G-Luftstrom vom geraden G/BSPP-Gewinde zu Gewinde, hochwertiges Absperrventil. Die Betriebskraft wird reduziert, die Konstruktion von Pubpet -Ventilen leidet selten nach Versiegelung. Das 3-Port-Ventil entlädt den Restdruck von 2A, wobei der Griff am geschlossen ist. Es ist für die Verwendung mit Nylon- und Urethanrohr und großer Halterkraft geeignet. Es kann für einen weiten Bereich von Drücken von einem niedrigen Impfstoff bis zu einem hohen Druck von 1,2 MPa/174psi, langer Lebensdauer, Luft durch und brechen Lebenszykluszahl, die 17,4 Millionen Zyklen erreicht haben. Die Luftanpassungsstruktur in der Anpassung/eine Touch-Anpassung ist eine schnelle Installation, einfach und flexibel, platzsparend, einfach zu einem Röhrchen mit einer Berührung angeschlossen. Alle sich verjüngten Gewinde werden mit Teflon mit feiner Seal-Leistung vorgeschoben.

NTA HVSF-G air flow from thread to push in connector high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass b...

NTA HVSS air flow from thread to thread high quality shut off valve//Finger Valve/Hand Valves/Residual Relief 3 Port Valve is used to turn on or shut off the compressed air flow in the pneumatic system. Operating force is reduced, poppet valve construction seldom suffers seal defection. The 3-port valve discharges residual pressure from 2A with the handle set at SHUT. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. All tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures a...