Brass Compression Fitting

NTA MTPCF high quality brass female connector/female brass compression fitting/female thread compression air fitting/female thread metal compression fitting is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, NTA brass push-in fittings are 100% leak-tested in production,guaranteed quality.                                                                                                                        ...

NTA MTPD nikel plated run tee compression fitting/run tee pneumatic compression fitting/run tee metal compression fitting is used to branch female thread at both straight and 90° right angles. It can be easily installed. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. NTA brass...

NTA MTPEG good quality nikel plated brass Tee compression reducer/pneumatic compression fitting Tee/compressed air reducing fitting/metal compression reducer fitting is connect different diameter tubes, It is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum.Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. NTA  bulkhead straight union brass compression fittings are 100% leak-tested in production,guaranteed quality.                                            ...

NTA MTPV stable quality brass compression elbow coupler/brass male elbow compression fitting/compression elbow air fitting/metal compression elbow fitting is used to connect tubes at right angles. It is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, NTA brass compression fittings are 100% leak-tested in production,guaranteed quality.                                                                         ...

NTA MTPM bulkhead straight union good quality nikel plated brass compression fitting/brass pneumatic compression fitting/compressed air bulkhead fitting/metal bulkdhead union straight compression fitting is connect tubing through a panel.  It is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other ...

NTA MTPLF high quality brass compression female elbow/brass female elbow compression fitting/compression elbow air fitting/metal compression elbow fitting  is used to pipe a male thread at right angles. It is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, NTA brass push-in fittings are 100% leak-tested in production,guaranteed quality.                                                                       ...

NTA MTPL high quality brass compression male elbow/brass male elbow compression fitting/compression elbow air fitting/metal compression elbow fitting is used to pipe a female thread at right angles. It is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, NTA brass push-in fittings are 100% leak-tested in production,guaranteed quality.                                                                           ...

NTA MTPZA good quality nikel plated brass cross coupler/pneumatic compression cross fitting/compressed air cross fitting/metal compression fitting is connect different diameter tubes, It is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. NT...

NTA MTPB nikel plated male branch tee compression fitting/branch tee pneumatic compression fitting/branch tee metal compression fitting is used to branch female thread at both 90° right angles. It can be easily installed. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. It is suitable for use with nylon and urethane tube. large retaining force, it can be used for a wide range of pressures, excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. NTA bras...

NTA MTPE union tee good quality nikel plated brass compression fittings/union tee compressed air coupler/metal union tee compression tube fitting is used to branch tubing at both 90° right angle.  It is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI, excellent resistance to high pressure and vacuum, excellent mechanical performance. Full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. NTA union tee brass push-in fittings are 100% leak-tested in production,guaranteed quality.                                  ...

NTA MTPC high quality brass compression male coupler/brass compression fitting/compression air fitting/metal compression fitting is suitable for use with hard nylon tube, brass pipe and stainless steel pipe, large retaining force, simple structure, reliable sealing ability, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 2.5MPa/362.5PSI,  excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, full flow, minimal pressure drop, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, NTA brass push-in fittings are 100% leak-tested in production,guaranteed quality.                                                                                                                                                    ...

NTA MTPH universal elbow high quality nikel plated compression fitting/pneumatic compression banjo fitting/metal compression banjo tube fitting/brass banjo fitting is ideal when access is only possible from above and orientation of the tube is required. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. Excellent resistance to high pressure and vacuum, excellent mechanical performance, Long threads to resist shock and vibration, excellent abrasion and corrosion resistance due to high phosphorus chemical nickel plating, Full flow, minimal pressure drop, excellent chemical compatibility, one fitting for numerous applications: stock optimisation, manual connection and disconnection, compact and ergonomic. long lifespan, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. NTA brass push-on fittings are 100% leak-tested in production,gu...