loading

NTA - Hersteller professioneller pneumatischer Komponenten & Ingenieur, spezialisiert auf pneumatische Zylinder, Luftfilterregler, Magnetventil und pneumatische Anpassungherstellung

PLF Female Elbow Plastic Push-in Fitting/ Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting 1
PLF Female Elbow Plastic Push-in Fitting/ Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting 1

PLF Female Elbow Plastic Push-in Fitting/ Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting

:                                            NTA PLF female thread high quality plastic push in elbow fitting is used to pipe a male thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. Sleeve shape round. BSPT thread R thread, BSPP threadG thread, and NPT threads are available                                        
:                                            NTA PLF female thread high quality plastic push in elbow fitting is used to pipe a male thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. Sleeve shape round. BSPT thread R thread, BSPP threadG thread, and NPT threads are available                                        
:                                            NTA PLF female thread high quality plastic push in elbow fitting is used to pipe a male thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. Sleeve shape round. BSPT thread R thread, BSPP threadG thread, and NPT threads are available                                        
:                                            NTA PLF female thread high quality plastic push in elbow fitting is used to pipe a male thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. Sleeve shape round. BSPT thread R thread, BSPP threadG thread, and NPT threads are available                                        

:NTA PLF female thread high quality plastic push in elbow fitting is used to pipe a male thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. Sleeve shape round. BSPT thread R thread, BSPP threadG thread, and NPT threads are available


Workingpressure
0~1.2MPa
TubeOD
4, 6, 8, 10, 12, 16mm
Fluid
Air
Lifetime
Longlifetime16MillionCycles(closewithFESTO)

    Hoppla...!

    Keine Produktdaten

    Gehen Sie zur Homepage

    Spezifikation

    : NTA PLF weiblicher Gewinde hochwertiger Kunststoffschub in Ellbogenanpassung wird verwendet, um einen männlichen Gewinde im rechten Winkel zu leiten. Es ist für die Verwendung mit Nylon- und Urethanrohr und großer Halterkraft geeignet. Es kann für einen weiten Bereich von Drücken von einem niedrigen Impfstoff bis zu einem hohen Druck von 1,2 MPa/174PSI, langer Lebensdauer, Luft durch und brechen Lebenszykluszahl, die 17,4 Millionen Zyklen erreicht haben, und 2,8 bis 348 Mal von anderen chinesischen Anbietern (0,05 bis 6,3 Mio.). Die Luftanpassungsstruktur (drücken in Anpassung/eine Touchsanpassung) ist eine schnelle Installation, einfach und flexibel, platzsparend und einfach zu anschließen Röhrchen mit einer Berührung. Auch nach der Installation dreht sich das Körperteil und ermöglicht die Positionierung der Positionierung, alle sich verjüngten Gewinde werden mit Teflon mit feiner Dichtungsleistung vorgeschichtet. Nickel-geplantes Messingkörper sorgt dafür, dass Anti-Korrosion und Anti-Kontamination mit einer Dichtung, O-Ring und Teflon-Behandlung auf der Fadenfäden ausgestattet sind. Ärmelnfarbe blau, schwarz, rot, grau, grün optional. Hülseform. BSPT -Thread (R -Thread), BSPP -Thread (G -Thread) und NPT -Threads sind verfügbar

    PLF.jpg



    Empfohlen
    PD-G Branch Tee Plastic Push-in Fitting/Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting
    NTA PD-G male G/BSPP thread high quality plastic push in branch tee fitting is used to branch a female thread at both straight and 90° right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color b...
    PX-G Branch Tee Plastic Push-in Fitting/Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting
    NTA PX male G/BSPP thread high quality Y type plastic push in branch tee fitting is used to branch a female thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, ...
    Cas -Patrone
    0 ~ 1,2mpa
    4,6,8,10,12,16 mm
    Luft
    PX Branch Tee Plastic Push-in Fitting/ Pneumatic Fitting/Compressed Air Fitting/One Touch Tube Fitting
    NTA PX male thread high quality Y type plastic push in branch tee fitting is used to branch a female thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles.  The air fitting structurepush in fitting/one touch fitting  is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, gr...
    keine Daten
    Senden Sie Ihre Anfrage
    Verwandte Produkte
    keine Daten

    Professioneller pneumatischer Zylinder, Luftfilterregler, Magnetventil und pneumatischer Anpassungsingenieur&Hersteller in China

    CONTACT US

      0086-136 1656 9784
      0086 136 1656 9784
      0086 136 1656 9784
      0086-574-8721 1981
      0086-574-8702 2814
      www.titan-automation.com

      jet@titan-automation.com

      Nr. 188, Nanshan North Road, Stadt Ningbo, Provinz Zhejiang, China.
    Bitte kontaktieren Sie uns

    Wir sind zuversichtlich zu sagen, dass unser Anpassungsdienst hervorragend ist.

    Copyright © 2025 Ningbo Titan Industrial Automation Co., Ltd. - www.titan-automation.com Alle Rechte vorbehalten. | Sitemap
    Customer service
    detect