PRODUCTS
Major Pneumatic Cylinder, Components Supplier Since 2002
Titan Automatic is a leading pneumatic components manufacturers and pneumatic components direct factory from China, Professional customization of various pneumatic components. Main products: Air cylinders, Compact Cylinders, Round Cylinders, Two&Three Rods Cylinders, pneumatic actuators, pneumatic Valves, NFPA cylinders, etc.
As one of the leading pneumatic cylinders manufacturers in China, we warmly welcome you to wholesale high-grade pneumatic cylinders made in China here from our factory. All our products are with high quality and low price. For more cheap products, contact us now!
Send your inquiry
NTA POC hex holed straight male G/BSPP thread high quality plastic push in fitting is used to pipe a female thread in the same direction. Internal hexagon socket allows tighting with a hexagon wrench in confined spaces. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring an...
NTA PC-G straight male G/BSPP thread high quality plastic push in fitting is used to pipe a female thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey...
NTA PC straight male thread high quality plastic push in fitting is used to pipe a female thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green o...
PMF Female Straight Bulkhead Union Plastic Push-in Fitting/ Pneumatic Fitting/Compressed Air Fitting
NTA PMF straight female thread bukhead union high quality plastic push in fitting is used to connect a male thread and tubing through a panel. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, b...
NTA POC hex holed straight male thread high quality plastic push in fitting is used to pipe a female thread in the same direction. Internal hexagon socket allows tighting with a hexagon wrench in confined spaces. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflo...
NTA PCF bulkhead straight female thread high quality plastic push in fitting is used to pipe a male thread in the same direction. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, gre...
NTA PL male thread high quality plastic push in elbow fitting is used to pipe a female thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. ...
NTA PLL male thread high quality plastic push in long elbow/extended male elbow fitting is basically used together with male elbow, its extended height allows for multy-leveled piping and prevents interferene among fittings. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ri...
NTA PKD male thread branch reduced triple high quality plastic push in fitting is used to reduced three-branch a female thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, b...
NTA PKB male thread branch triple high quality plastic push in fitting is used to three-branch a female thread at right angles. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey,...
NTA PM straight bukhead union high quality plastic push in fitting is used to connect tubing through a panel. It is suitable for use with nylon and urethane tube, large retaining force, it can be used for a wide range of pressures from a low vaccum up to a high pressure of 1.2MPa/174PSI, long lifetime, air through and break life cycle number reaching 17.4 million cycles, it is 2.8 to 348 times of lifetime from other Chinese fitting suppliers0.05 to 6.3 millions cycles. The air fitting structurepush in fitting/one touch fitting is quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Even after installation,body part rotates allowing for positioning, all tapered threads are pre-coated with Teflon with fine seal performance.Nickel-Plated brass body ensures anti-corrosion and anti-contamination.Fittings are equipped with a gasket, O-ring and Teflon-treatment on the thread, thread seal re-usable. Sleeve color bue, black, red, grey, green optional. S...
0.05~0.8MPa
Flow rate control valve
Air filtered by 40μm filter element
G1/8·G1/4·G3/8·G1/2·G3/4
Flow rate control valve
Air filtered by 40μm filter element
G1/8·G1/4·G3/8·G1/2·G3/4
no data
Industry's Leading Pneumatic Cylinder Manufacturer
Titan Automation is a manufacturing company specializing in the development, production, sales and service of pneumatic components. Is a professional China pneumatic components manufacturers and pneumatic components factory.
Titan Automation is a Ningbo-based leader in pneumatic technology and engineering, dedicated to the development, production, sales, and service of high-quality pneumatic components for industrial automation. With decades of manufacturing experience and a strong engineering heritage, Titan Automation focuses on delivering innovative, reliable solutions that help customers maximize production efficiency, protect personnel, and optimize energy use.
- With 26 years of pneumatics industry experience.
- With 21,000 ㎡+ factory area, one of the largest pneumatics production bases in China
- 9 automated production lines for pneumatic fittings.
- Equipped with an automated assembly system for pneumatic push-in fittings.
Why Choose us
no data
Products Categories
Pneumatic cylinders also called air cylinders are the final component of the pneumatic or compressed air control mechanical device. Air or pneumatic cylinders are devices that transform compressed air power into mechanical energy. Manufacturers can choose from a wide variety of pneumatic cylinders, including compact cylinders, ISO standard cylinders, NFPA interchangeable cylinders, rotary cylinders, rodless cylinders, and even specialty made-to-order units. This versatility allows them to tailor their automation solutions to suit specific applications.
Pneumatic valve is a device used to control the flow of air or other gasses in a pneumatic system. The valve can be actuated manually, electrically through a solenoid, motorized, or pneumatically. In this case, the media being controlled is air or gas, and hence the materials chosen for the valve body and seal should be compliant with these media. Possible options include aluminum, stainless steel, brass, and industrial-grade plastics. The most commonly used valves are the 3/2, 5/2 and 5/3 valves. With the various valves, different functions can be realised in a pneumatic system.
Pneumatic Vibrators offer high-frequency vibration designed to run off of pneumatic air power. Flexible and portable solutions. According to different pneumatic industrial vibrator structures, Titan Automatic produce pneumatic ball vibrators, pneumatic turbine vibrators, pneumatic roller vibrators, piston vibrators, impact air hammers, linear pneumatic vibrators.
Pneumatic fittings are used to connect tubes, hoses, air directional control valve and other pneumatic components in a pneumatic system. Titan automation manufactures a wide range of Pneumatic Quick Fittings which are good for use in a variety of industrial applications, our plastic push in fittings tested lifetime reaches 18 million cycles. We offer plenty of material options, plastic fittings using plastic body and brass threads, brass push in fittings using brass body and stainless steel claw, 304 stainless steel or 316 stainless steel pneumatic fittings are optional too.
Air Filter regulator lubricators, also known as FRLs, are designed to provide a clean air flow in pneumatic applications. Air Filter regulator lubricators (FRL) consists of three elements - a filter (F) to, generally, remove particles above 40 micron in size and water, a regulator (R), which controls pressure and a lubricator (L), to provide a controlled quantity of oil into the system. Titan Automation manufactures high-quality filters, regulators, and lubricators for use in a range of industrial applications.
Industrial shock absorbers work by converting kinetic energy into heat energy, thereby significantly reducing the impact and vibration of mechanical equipment and extending its service life. Titan Automation manufactures high-quality adjustable industrial shock absorbers, self-compensating shock absorbers, and rate controllers. Sizes range from M6, M8, M10, M12, M14, M20, M25, M30, M36, M42, M64, to M85. Titan Automation industrial shock absorbers are widely used in plastic bottle blowing machines, molding machines, industrial robots, automotive manufacturing equipment, conveyors, food and beverage equipment, and more.
Angle seat valve is an externally controlled valve that uses an angled seat to provide high flow rates and low pressure loss for controlling liquids and gases. Titan automation offers brass valve body, stainless steel valve body, we have plastic actuator, stainless steel actuator and aluminum actuators for customers’ choice. Our angle seat valves are widely use in food&beverage equipment, water industry, textile industry, medical and pharmaceutical industry, Sterilizers steam industry and other general industries.
A pneumatic manifold is a device used in pneumatic systems to distribute compressed air or gas to multiple paths from a single source. Pneumatic manifolds are not one-size-fits-all; they are available in various configurations to meet your specific needs. You can choose different pressure ratings, number of stations, port sizes, flow rates, and even housing materials. While some manifolds are designed to work only with valves from specific brands, others comply with universal standards such as ISO 5599 and ISO 15407, allowing you the flexibility to mix and match components from different manufacturers.
no data
LEAVE US A MESSAGE
Titan Automation is a manufacturing company specializing in the development, production, sales and service of pneumatic components. Is a professional China pneumatic components manufacturers and pneumatic components factory. Contact us for more information!
Titan Automation - Professional pneumatic cylinder, air filter regulator, solenoid valve and pneumatic fitting supplier & manufacturer in China
QUICK LINKS
Products
CONTACT US
0086-136 1656 9784
0086 136 1656 9784
0086 136 1656 9784 0086-574-8721 1981
0086-574-8702 2814
www.titan-automation.com
jet@titan-automation.com
NO.188,Nanshan North Road,Ningbo City,Zhejiang Province, China.Please contact us
We are confident to say that our customization service is outsatnding.